Anycubic Photon Mono SE Printer 3D printing settings for AmeraLabs resins
These are recommended 3D printing settings for Anycubic Photon Mono SE. Use these as a starting point and adjust based on the results you get. We recommend printing AmeraLabs town calibration part and following its guide to find perfect settings for your printer.
AMD-3 LED Black on Anycubic Photon Mono SE
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) | LED POWER |
| 0.100 | 1.9 | 4 | 30 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 80% |
| 0.050 | 1.4 | 4 | 30 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 80% |
| 0.030 | 1.1 | 4 | 20 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 80% |
AMD-3 LED Grey on Anycubic Photon Mono SE
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) | LED POWER |
| 0.100 | 2.4 | 4 | 40 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 80% |
| 0.050 | 1.8 | 4 | 30 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 80% |
| 0.030 | 1.4 | 4 | 30 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 80% |
TGM-7 LED Grey on Anycubic Photon Mono SE
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) | LED POWER |
| 0.100 | 3 | 4 | 50 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 80% |
| 0.050 | 2.3 | 4 | 40 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 80% |
| 0.030 | 1.7 | 4 | 30 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 80% |
TGM-7 LED White, Red, Yellow and Blue on Anycubic Photon Mono SE
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) | LED POWER |
| 0.100 | 2.7 | 4 | 50 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 80% |
| 0.050 | 2 | 4 | 40 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 80% |
| 0.030 | 1.5 | 4 | 30 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 80% |
DMD-21 LED Sand on Anycubic Photon Mono SE
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) | LED POWER |
| 0.100 | 2.4 | 4 | 40 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 80% |
| 0.050 | 1.8 | 4 | 30 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 80% |
| 0.030 | 1.4 | 4 | 30 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 80% |
DMD-31 DLP Beige and Grey on Anycubic Photon Mono SE
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) | LED POWER |
| 0.100 | 4.1 | 4 | 80 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 80% |
| 0.050 | 3.1 | 4 | 60 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 80% |
| 0.030 | 2.3 | 4 | 50 | 1 | 0 | 10 | 7 | 5 | 40 | 180 | 80% |