Anycubic Photon Mono X 6K

Anycubic Photon Mono X 6K Printer 3D printing settings for AmeraLabs resins

These are recommended 3D printing settings for Anycubic Photon Mono X 6K. Use these as a starting point and adjust based on the results you get. We recommend printing AmeraLabs town calibration part and following its guide to find perfect settings for your printer.

AMD-3 LED Black on Anycubic Photon Mono X 6K

Layer Thickness (mm)	Exposure Time (s)	Bottom Layers (count)	Bottom Exposure Time (s)	Rest Time After Retract (s)	Bottom Rest Time After Retract (s)	Bottom Lift Distance (mm)	Lifting Distance (mm)	Bottom Lift Speed (mm/min)	Lifting Speed (mm/min)	Retraction Speed (mm/min)	LED POWER
0.100	1.2	4	30	1	0	10	7	5	40	180	100%
0.050	0.9	4	30	1	0	10	7	5	40	180	100%
0.030	0.7	4	20	1	0	10	7	5	40	180	100%

AMD-3 LED Grey on Anycubic Photon Mono X 6K

Layer Thickness (mm)	Exposure Time (s)	Bottom Layers (count)	Bottom Exposure Time (s)	Rest Time After Retract (s)	Bottom Rest Time After Retract (s)	Bottom Lift Distance (mm)	Lifting Distance (mm)	Bottom Lift Speed (mm/min)	Lifting Speed (mm/min)	Retraction Speed (mm/min)	LED POWER
0.100	1.5	4	40	1	0	10	7	5	40	180	100%
0.050	1.1	4	30	1	0	10	7	5	40	180	100%
0.030	0.8	4	30	1	0	10	7	5	40	180	100%

TGM-7 LED Grey on Anycubic Photon Mono X 6K

Layer Thickness (mm)	Exposure Time (s)	Bottom Layers (count)	Bottom Exposure Time (s)	Rest Time After Retract (s)	Bottom Rest Time After Retract (s)	Bottom Lift Distance (mm)	Lifting Distance (mm)	Bottom Lift Speed (mm/min)	Lifting Speed (mm/min)	Retraction Speed (mm/min)	LED POWER
0.100	2	4	50	1	0	10	7	5	40	180	100%
0.050	1.5	4	40	1	0	10	7	5	40	180	100%
0.030	1.1	4	30	1	0	10	7	5	40	180	100%

TGM-7 LED White on Anycubic Photon Mono X 6K

Layer Thickness (mm)	Exposure Time (s)	Bottom Layers (count)	Bottom Exposure Time (s)	Rest Time After Retract (s)	Bottom Rest Time After Retract (s)	Bottom Lift Distance (mm)	Lifting Distance (mm)	Bottom Lift Speed (mm/min)	Lifting Speed (mm/min)	Retraction Speed (mm/min)	LED POWER
0.100	1.75	4	50	1	0	10	7	5	40	180	100%
0.050	1.3	4	40	1	0	10	7	5	40	180	100%
0.030	1.0	4	30	1	0	10	7	5	40	180	100%

DMD-21 LED Sand on Anycubic Photon Mono X 6K

Layer Thickness (mm)	Exposure Time (s)	Bottom Layers (count)	Bottom Exposure Time (s)	Rest Time After Retract (s)	Bottom Rest Time After Retract (s)	Bottom Lift Distance (mm)	Lifting Distance (mm)	Bottom Lift Speed (mm/min)	Lifting Speed (mm/min)	Retraction Speed (mm/min)	LED POWER
0.100	1.5	4	40	1	0	10	7	5	40	180	100%
0.050	1.1	4	30	1	0	10	7	5	40	180	100%
0.030	0.8	4	30	1	0	10	7	5	40	180	100%

DMD-31 DLP Beige and Grey on Anycubic Photon Mono X 6K

Layer Thickness (mm)	Exposure Time (s)	Bottom Layers (count)	Bottom Exposure Time (s)	Rest Time After Retract (s)	Bottom Rest Time After Retract (s)	Bottom Lift Distance (mm)	Lifting Distance (mm)	Bottom Lift Speed (mm/min)	Lifting Speed (mm/min)	Retraction Speed (mm/min)	LED POWER
0.100	2.5	4	50	1	0	10	7	5	40	180	100%
0.050	1.9	4	40	1	0	10	7	5	40	180	100%
0.030	1.4	4	30	1	0	10	7	5	40	180	100%