Anycubic Photon Mono X Printer 3D printing settings for AmeraLabs resins

These are recommended 3D printing settings for Anycubic Photon Mono X 3D printer. Use these as a starting point and adjust based on the results you get. We recommend printing AmeraLabs town calibration part and following its guide to find perfect settings for your printer.

AMD-3 LED Black on Anycubic Photon Mono X

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Rest Time After Retract (s)Bottom Rest Time After Retract (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)LED POWER
0.1001.44301010754018075%
0.05014301010754018075%
0.0300.84201010754018075%

AMD-3 LED Grey on Anycubic Photon Mono X

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Rest Time After Retract (s)Bottom Rest Time After Retract (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)LED POWER
0.1001.64401010754018075%
0.0501.24301010754018075%
0.0300.94201010754018075%

TGM-7 LED Grey on Anycubic Photon Mono X

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Rest Time After Retract (s)Bottom Rest Time After Retract (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)LED POWER
0.1001.54301010754018075%
0.0501.14201010754018075%
0.0300.94151010754018075%

TGM-7 LED White on Anycubic Photon Mono X

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Rest Time After Retract (s)Bottom Rest Time After Retract (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)LED POWER
0.1001.24501010754018075%
0.0500.94401010754018075%
0.0300.74301010754018075%

DMD-21 LED Sand on Anycubic Photon Mono X

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Rest Time After Retract (s)Bottom Rest Time After Retract (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)LED POWER
0.1001.64401010754018075%
0.0501.24301010754018075%
0.0300.94201010754018075%

DMD-31 DLP Beige and Grey on Anycubic Photon Mono X

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Rest Time After Retract (s)Bottom Rest Time After Retract (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)LED POWER
0.1002.04601010754018075%
0.0501.54401010754018075%
0.0301.24301010754018075%