Elegoo Mars Printer 3D printing settings for AmeraLabs resins

These are recommended 3D printing settings for Elegoo Mars 3D printer. Use these as a starting point and adjust based on the results you get. We recommend printing AmeraLabs town calibration part and following its guide to find perfect settings for your printer.

AMD-3 LED Black on Elegoo Mars

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Light-Off Delay (s)Bottom Light-Off Delay (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1004.848011.50107540180
0.0503.646011.50107540180
0.0302.745011.50107540180

AMD-3 LED Grey on Elegoo Mars

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Light-Off Delay (s)Bottom Light-Off Delay (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.100649011.50107540180
0.0504.547011.50107540180
0.0303.446011.50107540180

TGM-7 LED Grey on Elegoo Mars

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Light-Off Delay (s)Bottom Light-Off Delay (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1007.5412011.50107540180
0.0505.649011.50107540180
0.0304.247011.50107540180

TGM-7 LED White on Elegoo Mars

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Light-Off Delay (s)Bottom Light-Off Delay (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1006.7412011.50107540180
0.050549011.50107540180
0.0303.847011.50107540180

DMD-21 LED Sand on Elegoo Mars

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Light-Off Delay (s)Bottom Light-Off Delay (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.100649011.50107540180
0.0504.547011.50107540180
0.0303.446011.50107540180

DMD-31 DLP Beige and Grey on Elegoo Mars

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Light-Off Delay (s)Bottom Light-Off Delay (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.10010.2412011.50107540180
0.0507.749011.50107540180
0.0305.748011.50107540180