Elegoo Saturn Printer 3D printing settings for AmeraLabs resins

These are recommended 3D printing settings for Elegoo Saturn 3D printer. Use these as a starting point and adjust based on the results you get. We recommend printing AmeraLabs town calibration part and following its guide to find perfect settings for your printer.

AMD-3 LED Black on Elegoo Saturn

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Light-Off Delay (s)Bottom Light-Off Delay (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1002.544011.50107540180
0.0501.943011.50107540180
0.0301.443011.50107540180

AMD-3 LED Grey on Elegoo Saturn

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Light-Off Delay (s)Bottom Light-Off Delay (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1003.245011.50107540180
0.0502.444011.50107540180
0.0301.843011.50107540180

TGM-7 LED Grey on Elegoo Saturn

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Light-Off Delay (s)Bottom Light-Off Delay (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1004.247011.50107540180
0.0503.245011.50107540180
0.0302.444011.50107540180

TGM-7 LED White on Elegoo Saturn

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Light-Off Delay (s)Bottom Light-Off Delay (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1003.747011.50107540180
0.0502.845011.50107540180
0.0302.144011.50107540180

DMD-21 LED Sand on Elegoo Saturn

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Light-Off Delay (s)Bottom Light-Off Delay (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1003.245011.50107540180
0.0502.444011.50107540180
0.0301.843011.50107540180

DMD-31  DLP Beige and Grey on Elegoo Saturn

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Light-Off Delay (s)Bottom Light-Off Delay (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1005.448011.50107540180
0.0504.146011.50107540180
0.0303.144011.50107540180