Epax E10 4K Printer 3D printing settings for AmeraLabs resins
These are recommended 3D printing settings for Epax E10 3D printer. Use these as a starting point and adjust based on the results you get. We recommend printing AmeraLabs town calibration part and following its guide to find perfect settings for your printer.
AMD-3 LED Black on Epax E10
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Light-Off Delay (s) | Bottom Light-Off Delay (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 1.5 | 4 | 30 | 11.5 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 1.1 | 4 | 20 | 11.5 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.030 | 0.9 | 4 | 20 | 11.5 | 0 | 10 | 7 | 5 | 40 | 180 |
AMD-3 LED Grey on Epax E10
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Light-Off Delay (s) | Bottom Light-Off Delay (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 1.9 | 4 | 30 | 11.5 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 1.4 | 4 | 20 | 11.5 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.030 | 1.1 | 4 | 20 | 11.5 | 0 | 10 | 7 | 5 | 40 | 180 |
TGM-7 LED Grey on Epax E10
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Light-Off Delay (s) | Bottom Light-Off Delay (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 2.5 | 4 | 40 | 11.5 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 1.9 | 4 | 30 | 11.5 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.030 | 1.4 | 4 | 30 | 11.5 | 0 | 10 | 7 | 5 | 40 | 180 |
TGM-7 LED White, Red, Yellow and Blue on Epax E10
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Light-Off Delay (s) | Bottom Light-Off Delay (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 2.2 | 4 | 40 | 11.5 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 1.6 | 4 | 30 | 11.5 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.030 | 1.2 | 4 | 30 | 11.5 | 0 | 10 | 7 | 5 | 40 | 180 |
DMD-21 LED Sand on Epax E10
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Light-Off Delay (s) | Bottom Light-Off Delay (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 1.9 | 4 | 30 | 11.5 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 1.4 | 4 | 30 | 11.5 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.030 | 1.1 | 4 | 20 | 11.5 | 0 | 10 | 7 | 5 | 40 | 180 |
DMD-31 DLP Beige and Grey on Epax E10
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Light-Off Delay (s) | Bottom Light-Off Delay (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 3.2 | 4 | 30 | 11.5 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 2.4 | 4 | 30 | 11.5 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.030 | 1.8 | 4 | 20 | 11.5 | 0 | 10 | 7 | 5 | 40 | 180 |