Epax E6

Epax E6 Printer 3D printing settings for AmeraLabs resins

These are recommended 3D printing settings for Epax E6 3D printer. Use these as a starting point and adjust based on the results you get. We recommend printing AmeraLabs town calibration part and following its guide to find perfect settings for your printer.

AMD-3 LED Black on Epax E6

Layer Thickness (mm)	Exposure Time (s)	Bottom Layers (count)	Bottom Exposure Time (s)	Light-Off Delay (s)	Bottom Light-Off Delay (s)	Bottom Lift Distance (mm)	Lifting Distance (mm)	Bottom Lift Speed (mm/min)	Lifting Speed (mm/min)	Retraction Speed (mm/min)
0.100	1.4	4	30	11.5	0	10	7	5	40	180
0.050	1.0	4	20	11.5	0	10	7	5	40	180
0.030	0.8	4	20	11.5	0	10	7	5	40	180

AMD-3 LED Grey on Epax E6

Layer Thickness (mm)	Exposure Time (s)	Bottom Layers (count)	Bottom Exposure Time (s)	Light-Off Delay (s)	Bottom Light-Off Delay (s)	Bottom Lift Distance (mm)	Lifting Distance (mm)	Bottom Lift Speed (mm/min)	Lifting Speed (mm/min)	Retraction Speed (mm/min)
0.100	1.7	4	30	11.5	0	10	7	5	40	180
0.050	1.3	4	20	11.5	0	10	7	5	40	180
0.030	1.0	4	20	11.5	0	10	7	5	40	180

TGM-7 LED Grey on Epax E6

Layer Thickness (mm)	Exposure Time (s)	Bottom Layers (count)	Bottom Exposure Time (s)	Light-Off Delay (s)	Bottom Light-Off Delay (s)	Bottom Lift Distance (mm)	Lifting Distance (mm)	Bottom Lift Speed (mm/min)	Lifting Speed (mm/min)	Retraction Speed (mm/min)
0.100	2.3	4	30	11.5	0	10	7	5	40	180
0.050	1.7	4	20	11.5	0	10	7	5	40	180
0.030	1.3	4	20	11.5	0	10	7	5	40	180

TGM-7 LED White on Epax E6

Layer Thickness (mm)	Exposure Time (s)	Bottom Layers (count)	Bottom Exposure Time (s)	Light-Off Delay (s)	Bottom Light-Off Delay (s)	Bottom Lift Distance (mm)	Lifting Distance (mm)	Bottom Lift Speed (mm/min)	Lifting Speed (mm/min)	Retraction Speed (mm/min)
0.100	2	4	30	11.5	0	10	7	5	40	180
0.050	1.5	4	20	11.5	0	10	7	5	40	180
0.030	1.1	4	20	11.5	0	10	7	5	40	180

DMD-21 LED Sand on Epax E6

Layer Thickness (mm)	Exposure Time (s)	Bottom Layers (count)	Bottom Exposure Time (s)	Light-Off Delay (s)	Bottom Light-Off Delay (s)	Bottom Lift Distance (mm)	Lifting Distance (mm)	Bottom Lift Speed (mm/min)	Lifting Speed (mm/min)	Retraction Speed (mm/min)
0.100	1.7	4	30	11.5	0	10	7	5	40	180
0.050	1.3	4	20	11.5	0	10	7	5	40	180
0.030	1.0	4	20	11.5	0	10	7	5	40	180

DMD-31 DLP Beige and Grey on Epax E6

Layer Thickness (mm)	Exposure Time (s)	Bottom Layers (count)	Bottom Exposure Time (s)	Light-Off Delay (s)	Bottom Light-Off Delay (s)	Bottom Lift Distance (mm)	Lifting Distance (mm)	Bottom Lift Speed (mm/min)	Lifting Speed (mm/min)	Retraction Speed (mm/min)
0.100	2.9	4	40	11.5	0	10	7	5	40	180
0.050	2.2	4	30	11.5	0	10	7	5	40	180
0.030	1.7	4	20	11.5	0	10	7	5	40	180