Epax X1-DJ Printer 3D printing settings for AmeraLabs resins

These are recommended 3D printing settings for Epax X1-DJ 3D printer (original version with 40W LED light source and color LCD). Use these as a starting point and adjust based on the results you get. We recommend printing AmeraLabs town calibration part and following its guide to find perfect settings for your printer.

AMD-3 LED Black on Epax X1-DJ

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Light-Off Delay (s)Bottom Light-Off Delay (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1004.747011.50107540180
0.0503.546011.50107540180
0.0302.644011.50107540180

AMD-3 LED Grey on Epax X1-DJ

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Light-Off Delay (s)Bottom Light-Off Delay (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1005.849011.50107540180
0.0504.447011.50107540180
0.0303.345011.50107540180

TGM-7 LED Grey on Epax X1-DJ

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Light-Off Delay (s)Bottom Light-Off Delay (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1007.8412011.50107540180
0.0505.849011.50107540180
0.0304.447011.50107540180

TGM-7 LED White, Red, Yellow and Blue on Epax X1-DJ

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Light-Off Delay (s)Bottom Light-Off Delay (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1006.8412011.50107540180
0.0505.149011.50107540180
0.0303.447011.50107540180

DMD-21 LED Sand on Epax X1-DJ

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Light-Off Delay (s)Bottom Light-Off Delay (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1005.849011.50107540180
0.0504.447011.50107540180
0.0303.345011.50107540180

DMD-31 DLP Beige and Grey on Epax X1-DJ

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Light-Off Delay (s)Bottom Light-Off Delay (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.10010410011.50107540180
0.0507.548011.50107540180
0.0305.646011.50107540180