These are recommended 3D printing settings for Epax X10 8.9 inch 4K Mono 3D printer. Use these as a starting point and adjust based on the results you get. We recommend printing AmeraLabs town calibration part and following its guide to find perfect settings for your printer.

AMD-3 LED Black on Epax X10 8.9 inch 4K Mono

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Light-Off Delay (s)Bottom Light-Off Delay (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1001.6440150108540180
0.0501.2430150108540180
0.0300.9420150108540180

AMD-3 LED Grey on Epax X10 8.9 inch 4K Mono

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Light-Off Delay (s)Bottom Light-Off Delay (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1001.9440150108540180
0.0501.4430150108540180
0.0301.1420150108540180

TGM-7 LED Grey on Epax X10 8.9 inch 4K Mono

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Light-Off Delay (s)Bottom Light-Off Delay (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1002.3440150108540180
0.0501.7430150108540180
0.0301.3420150108540180

TGM-7 LED White, Red, Yellow and Blue on Epax X10 8.9 inch 4K Mono

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Light-Off Delay (s)Bottom Light-Off Delay (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1002.1440150108540180
0.0501.5430150108540180
0.0301.2420150108540180

DMD-21 LED Sand on Epax X10 8.9 inch 4K Mono

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Light-Off Delay (s)Bottom Light-Off Delay (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1001.9440150108540180
0.0501.4430150108540180
0.0301.1420150108540180

DMD-31 DLP Beige and Grey on Epax X10 8.9 inch 4K Mono

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Light-Off Delay (s)Bottom Light-Off Delay (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1003.2440150108540180
0.0502.4430150108540180
0.0301.8420150108540180