Kudo3D Bean Printer 3D printing settings for AmeraLabs resins

These are recommended 3D printing settings for Kudo3D Bean 3D printer. Use these as a starting point and adjust based on the results you get. We recommend printing AmeraLabs town calibration part and following its guide to find perfect settings for your printer.

AMD-3 LED Black on Kudo3D Bean

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Rest Time After Retract (s)Bottom Rest Time After Retract (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1002.945010107540180
0.0502.244010107540180
0.0301.743010107540180

AMD-3 LED Grey on Kudo3D Bean

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Rest Time After Retract (s)Bottom Rest Time After Retract (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1003.746010107540180
0.0502.845010107540180
0.0302.144010107540180

TGM-7 LED Grey on Kudo3D Bean

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Rest Time After Retract (s)Bottom Rest Time After Retract (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1004.948010107540180
0.0503.746010107540180
0.0302.845010107540180

TGM-7 LED White on Kudo3D Bean

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Rest Time After Retract (s)Bottom Rest Time After Retract (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1004.348010107540180
0.0503.246010107540180
0.0302.545010107540180

DMD-21 LED Sand on Kudo3D Bean

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Rest Time After Retract (s)Bottom Rest Time After Retract (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1003.746010107540180
0.0502.845010107540180
0.0302.144010107540180

DMD-31 DLP Beige and Grey on Kudo3D Bean

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Rest Time After Retract (s)Bottom Rest Time After Retract (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1006.347010107540180
0.0504.845010107540180
0.0303.644010107540180