Peopoly Phenom Printer 3D printing settings for AmeraLabs resins
These are recommended 3D printing settings for Peopoly Phenom 3D printer. Use these as a starting point and adjust based on the results you get. We recommend printing AmeraLabs town calibration part and following its guide to find perfect settings for your printer.
AMD-3 LED Black on Peopoly Phenom
Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
0.100 | 8.7 | 4 | 130 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
0.050 | 6.5 | 4 | 100 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
0.030 | 4.9 | 4 | 80 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
AMD-3 LED Grey on Peopoly Phenom
Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
0.100 | 10.8 | 4 | 170 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
0.050 | 8.1 | 4 | 130 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
0.030 | 6.1 | 4 | 100 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
TGM-7 LED Grey on Peopoly Phenom
Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
0.100 | 14.4 | 4 | 220 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
0.050 | 10.8 | 4 | 170 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
0.030 | 8.1 | 4 | 130 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
TGM-7 LED White, Red, Yellow and Blue on Peopoly Phenom
Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
0.100 | 12.6 | 4 | 220 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
0.050 | 9.5 | 4 | 170 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
0.030 | 7.1 | 4 | 130 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
DMD-21 LED Sand on Peopoly Phenom
Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
0.100 | 10.8 | 4 | 170 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
0.050 | 8.1 | 4 | 130 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
0.030 | 6.1 | 4 | 100 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
DMD-31 DLP Beige and Grey on Peopoly Phenom
Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
0.100 | 18.4 | 4 | 180 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
0.050 | 13.8 | 4 | 160 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
0.030 | 10.3 | 4 | 120 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |