Prusa SL1 Printer 3D printing settings for AmeraLabs resins
These are recommended 3D printing settings for Prusa SL1 3D printer. Use these as a starting point and adjust based on the results you get. We recommend printing AmeraLabs town calibration part and following its guide to find perfect settings for your printer. You can also find the latest profiles in PrusaSlicer.
AMD-3 LED Black on Prusa SL1
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 5.6 | 4 | 50 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 4.2 | 4 | 35 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.030 | 3.2 | 4 | 30 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
AMD-3 LED Grey on Prusa SL1
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 7 | 4 | 50 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 5 | 4 | 35 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.030 | 3.9 | 4 | 30 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
TGM-7 LED Grey on Prusa SL1
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 10 | 4 | 50 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 7 | 4 | 35 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.030 | 5 | 4 | 30 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
TGM-7 LED White, Red, Yellow and Blue on Prusa SL1
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 8.5 | 4 | 50 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 6.1 | 4 | 35 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.030 | 4.5 | 4 | 30 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
DMD-21 LED Sand on Prusa SL1
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 7 | 4 | 50 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 5.3 | 4 | 35 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.030 | 3.9 | 4 | 30 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
DMD-31 DLP Beige and Grey on Prusa SL1
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 12 | 4 | 120 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 9 | 4 | 90 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.030 | 6.8 | 4 | 70 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |