Prusa SL1S Printer 3D printing settings for AmeraLabs resins

These are recommended 3D printing settings for Prusa SL1S 3D printer. Use these as a starting point and adjust based on the results you get. We recommend printing AmeraLabs town calibration part and following its guide to find perfect settings for your printer. You can also find the latest profiles in PrusaSlicer

AMD-3 LED Black on Prusa SL1S

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Rest Time After Retract (s)Bottom Rest Time After Retract (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1001.643010107540180
0.0501.242010107540180
0.0300.942010107540180

AMD-3 LED Grey on Prusa SL1S

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Rest Time After Retract (s)Bottom Rest Time After Retract (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1002.043010107540180
0.0501.543010107540180
0.0301.142010107540180

TGM-7 LED Grey on Prusa SL1S

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Rest Time After Retract (s)Bottom Rest Time After Retract (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1002.744010107540180
0.050243010107540180
0.0301.543010107540180

TGM-7 LED White on Prusa SL1S

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Rest Time After Retract (s)Bottom Rest Time After Retract (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1002.444010107540180
0.0501.743010107540180
0.0301.243010107540180

DMD-21 LED Sand on Prusa SL1S

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Rest Time After Retract (s)Bottom Rest Time After Retract (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.100243010107540180
0.0501.543010107540180
0.0301.142010107540180

DMD-31 DLP Beige and Grey on Prusa SL1S

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Rest Time After Retract (s)Bottom Rest Time After Retract (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1003.444010107540180
0.0502.643010107540180
0.0301.942010107540180