Uniz Slash 2 Printer 3D printing settings for AmeraLabs resins

These are recommended 3D printing settings for Uniz Slash 2 3D printer. Use these as a starting point and adjust based on the results you get. We recommend printing AmeraLabs town calibration part and following its guide to find perfect settings for your printer.

AMD-3 LED Black on Uniz Slash 2

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Rest Time After Retract (s)Bottom Rest Time After Retract (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1003.743010107540180
0.0502.842510107540180
0.0302.142010107540180

AMD-3 LED Grey on Uniz Slash 2

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Rest Time After Retract (s)Bottom Rest Time After Retract (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1004.743510107540180
0.0503.543010107540180
0.0302.642010107540180

TGM-7 LED Grey on Uniz Slash 2

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Rest Time After Retract (s)Bottom Rest Time After Retract (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1006.245010107540180
0.0504.743510107540180
0.0303.543010107540180

TGM-7 LED White on Uniz Slash 2

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Rest Time After Retract (s)Bottom Rest Time After Retract (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1005.545010107540180
0.0504.143510107540180
0.0303.143010107540180

DMD-21 LED Sand on Uniz Slash 2

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Rest Time After Retract (s)Bottom Rest Time After Retract (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1004.743510107540180
0.0503.543010107540180
0.0302.642010107540180

DMD-31 DLP Beige and Grey on Uniz Slash 2

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Rest Time After Retract (s)Bottom Rest Time After Retract (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1007.949010107540180
0.050647010107540180
0.0304.545010107540180