Uniz Slash Plus Printer 3D printing settings for AmeraLabs resins
These are recommended 3D printing settings for Uniz Slash Plus 3D printer. Use these as a starting point and adjust based on the results you get. We recommend printing AmeraLabs town calibration part and following its guide to find perfect settings for your printer.
AMD-3 LED Black on Uniz Slash Plus
Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
0.100 | 4 | 4 | 24 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
0.050 | 3 | 4 | 20 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
0.030 | 2.3 | 4 | 16 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
AMD-3 LED Grey on Uniz Slash Plus
Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
0.100 | 5 | 4 | 32 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
0.050 | 3.8 | 4 | 24 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
0.030 | 2.8 | 4 | 20 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
TGM-7 LED Grey on Uniz Slash Plus
Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
0.100 | 6.7 | 4 | 40 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
0.050 | 5 | 4 | 32 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
0.030 | 3.8 | 4 | 24 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
TGM-7 LED White, Red, Yellow and Blue on Uniz Slash Plus
Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
0.100 | 5.9 | 4 | 40 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
0.050 | 4.4 | 4 | 32 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
0.030 | 3.3 | 4 | 24 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
DMD-21 LED Sand on Uniz Slash Plus
Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
0.100 | 5 | 4 | 32 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
0.050 | 3.8 | 4 | 24 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
0.030 | 2.8 | 4 | 20 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
DMD-31 DLP Beige and Grey on Uniz Slash Plus
Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
0.100 | 8.6 | 4 | 90 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
0.050 | 6.5 | 4 | 70 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
0.030 | 4.8 | 4 | 50 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |