Wanhao D8 Printer 3D printing settings for AmeraLabs resins

These are recommended 3D printing settings for Wanhao D8 3D printer. Use these as a starting point and adjust based on the results you get. We recommend printing AmeraLabs town calibration part and following its guide to find perfect settings for your printer.

AMD-3 LED Black on Wanhao D8

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Rest Time After Retract (s)Bottom Rest Time After Retract (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1008412010107540180
0.050649010107540180
0.0304.547010107540180

AMD-3 LED Grey on Wanhao D8

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Rest Time After Retract (s)Bottom Rest Time After Retract (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.10010415010107540180
0.0507.5412010107540180
0.0305.649010107540180

TGM-7 LED Grey on Wanhao D8

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Rest Time After Retract (s)Bottom Rest Time After Retract (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.10013.3420010107540180
0.05010415010107540180
0.0307.5412010107540180

TGM-7 LED White on Wanhao D8

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Rest Time After Retract (s)Bottom Rest Time After Retract (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.10011.7420010107540180
0.0508.8415010107540180
0.0306.5412010107540180

DMD-21 LED Sand on Wanhao D8

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Rest Time After Retract (s)Bottom Rest Time After Retract (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.10010415010107540180
0.0507.5412010107540180
0.0305.649010107540180

DMD-31 DLP Beige and Grey on Wanhao D8

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Rest Time After Retract (s)Bottom Rest Time After Retract (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.10017418010107540180
0.05012.8416010107540180
0.0309.6412010107540180