Zortrax Inkspire

Zortrax Inkspire Printer 3D printing settings for AmeraLabs resins

These are recommended 3D printing settings for Zortrax Inkspire 3D printer. Use these as a starting point and adjust based on the results you get. We recommend printing AmeraLabs town calibration part and following its guide to find perfect settings for your printer.

AMD-3 LED Black on Zortrax Inkspire

Layer Thickness (mm)	Exposure Time (s)	Bottom Layers (count)	Bottom Exposure Time (s)	Exposure Off Time (s)	Bottom Exposure Off Time (s)	Bottom Lift Distance (mm)	Lifting Distance (mm)	Bottom Lift Speed (mm/min)	Lifting Speed (mm/min)	Retraction Speed (mm/min)
0.100	4	4	60	1	0	10	7	5	40	180
0.050	3	4	50	1	0	10	7	5	40	180
0.030	2.25	4	40	1	0	10	7	5	40	180

AMD-3 LED Grey on Zortrax Inkspire

Layer Thickness (mm)	Exposure Time (s)	Bottom Layers (count)	Bottom Exposure Time (s)	Exposure Off Time (s)	Bottom Exposure Off Time (s)	Bottom Lift Distance (mm)	Lifting Distance (mm)	Bottom Lift Speed (mm/min)	Lifting Speed (mm/min)	Retraction Speed (mm/min)
0.100	4.75	4	70	1	0	10	7	5	40	180
0.050	3.5	4	60	1	0	10	7	5	40	180
0.030	2.75	4	40	1	0	10	7	5	40	180

TGM-7 LED Grey on Zortrax Inkspire

Layer Thickness (mm)	Exposure Time (s)	Bottom Layers (count)	Bottom Exposure Time (s)	Exposure Off Time (s)	Bottom Exposure Off Time (s)	Bottom Lift Distance (mm)	Lifting Distance (mm)	Bottom Lift Speed (mm/min)	Lifting Speed (mm/min)	Retraction Speed (mm/min)
0.100	6.2	4	100	1	0	10	7	5	40	180
0.050	4.7	4	70	1	0	10	7	5	40	180
0.030	3.5	4	60	1	0	10	7	5	40	180

TGM-7 LED Grey on Zortrax Inkspire

Layer Thickness (mm)	Exposure Time (s)	Bottom Layers (count)	Bottom Exposure Time (s)	Exposure Off Time (s)	Bottom Exposure Off Time (s)	Bottom Lift Distance (mm)	Lifting Distance (mm)	Bottom Lift Speed (mm/min)	Lifting Speed (mm/min)	Retraction Speed (mm/min)
0.100	5.5	4	100	1	0	10	7	5	40	180
0.050	4.1	4	70	1	0	10	7	5	40	180
0.030	3.1	4	60	1	0	10	7	5	40	180

DMD-21 LED Sand on Zortrax Inkspire

Layer Thickness (mm)	Exposure Time (s)	Bottom Layers (count)	Bottom Exposure Time (s)	Exposure Off Time (s)	Bottom Exposure Off Time (s)	Bottom Lift Distance (mm)	Lifting Distance (mm)	Bottom Lift Speed (mm/min)	Lifting Speed (mm/min)	Retraction Speed (mm/min)
0.100	4.75	4	70	1	0	10	7	5	40	180
0.050	3.5	4	60	1	0	10	7	5	40	180
0.030	2.75	4	40	1	0	10	7	5	40	180

DMD-31 DLP Beige and Grey on Zortrax Inkspire

Layer Thickness (mm)	Exposure Time (s)	Bottom Layers (count)	Bottom Exposure Time (s)	Exposure Off Time (s)	Bottom Exposure Off Time (s)	Bottom Lift Distance (mm)	Lifting Distance (mm)	Bottom Lift Speed (mm/min)	Lifting Speed (mm/min)	Retraction Speed (mm/min)
0.100	7.9	4	90	1	0	10	7	5	40	180
0.050	6.0	4	70	1	0	10	7	5	40	180
0.030	4.5	4	60	1	0	10	7	5	40	180