IPR-12 DLP resin for Industrial Prototyping


Tough resin for Industrial Prototyping

IPR-12 resin was formulated to produce parts with high toughness and a bit of flexibility. This unique UV 3D printer ink will enable you to print fracture-resistant parts for functional performance. Created for aviation engineers, affordable for everyone.



AmeraLabs IPR-12 is for 3D printers with DLP projectors AmeraLabs IPR-12 is NOT COMPATIBLE with powerful LASER based SLA 3D printers AmeraLabs IPR-12 is NOT COMPATIBLE with low powered LED/LCD 3D printers          AmeraLabs IPR-12 is for FEP Teflon film based VAT systems AmeraLabs IPR-12 is NOT COMPATIBLE with PDMS based VAT systems

IPR-12-DLP was calibrated to produce best results on DLP 3D printers using projectors which emit 400-420nm UV light. Also it should not be used with PDMS based resin trays, because it is too reactive and can damage your PDMS silicon layer. We strongly recommend to use it with FEP film based resin trays.

For example: 210 Watt projector emitting 3000 lm cures 50 um layer with 1,5 sec exposure. Adjust according to the specifications of your 3D printer and experiment to get the best results.

Compatible with: 3D Facture Draken, Kudo3D Titan 1, Titan 2, Phrozen One and 1.5, Little RP,  MiiCraft, Gizmo3D GiziMate, GiziPro, GiziMax, Atum3D, Futur3D DWARF, Reify Sous, 3D Labs Totem3D, Microlay DentalFab, mUVe Pro, Pro+,  3D Maker, ULTIPro+, ULTIPro MAX and similar 3D printers.

This material will not work on 3D printers with low powered LED light sources like Anycubic Photon, SparkMaker, Wanhao D7, Proniks YHD-101, YHD-102, KLD LCD 1250/1260/1268/2510, MiniQ, xCube, D2K Illuminate and similar 3D printers. Take a look at AMD-3 LED material, if you have these 3D printers.


Initial printing settings

You can find initial 3D printer settings for this material here: The Beginner’s Guide to 3D printing with AmeraLabs resins



Fast functional prototyping Aerospace Automotive Consumer goods Education and training Entertainment Manufacturing, injection molding, tooling, jigs and fixtures Modelling and miniatures

Resin properties


Tensile Strength at Yield

ISO-527, post cure

62 MPa
Elongation at Yield

ISO-527, post cure


at 25° C

400 cPs

ISO 868

75 Shore D
UV Lightsource Wavelength 365 – 420 nm
Shrinkage less than 0,75%
Color Crystal Black Dye
This website stores cookies on your computer. These cookies are used to collect information about how you interact with our website and allow us to remember you. To find out more, see our Privacy Policy.. I AGREE