Topic: UV resin 3D printer

9 common mistakes when switching from FDM to SLA 3D printing

If you are an FDM user thinking about switching to resin 3D printing (or maybe you've already made the switch), you must have heard that it’s a different world. In this article we will dive into some critical errors and misconceptions people make when transitioning from FDM to SLA 3D printing.

Tutorials

Experiment: 3D Printing Supports that Work

In a previous blog post "6 Key Principles of 3D Printing Supports that Work" we have covered why support structures are needed, how to properly set them up for SLA 3D printing and the key reasons behind failing supports. This time we set out to prove our assumptions with an experiment.

Downloads, Tutorials

6 Key Principles of 3D Printing Supports that Work

Sometimes after 3D printing with resin you only get support structures on the build plate instead of the intended object. We share key reasons behind why this happens and why support fail. Learn why support structures are needed in the first place and how to properly set them up for SLA 3D printing.

Tutorials

Can IPA cause cracks on my 3D prints?

Although many of us use IPA (isopropyl alcohol) to clean our DLP 3D printed models, not many know what impact it may have on their 3D prints. In this edition we will conduct an experiment on how IPA can affect our SLA 3D prints.

Tutorials

Case Study: ViLim Ball – therepeutic device with 3D printed housing

ViLim Ball is a therapeutic device which was created for reduction of symptoms for Essential tremor, Parkinson’s disease and Rheumatoid arthritis. Read how we 3D printed its housing.

Case Studies, Tutorials

Case Study: 3D printed Linear Gear for Extensometer

A case study of 3D printed linear gear for high precision extensometer. This article covers all steps of 3D printing process up until the final result.

Case Studies, Tutorials

Case Study: 3D printed button for Porsche steering wheel

A case study of 3D printed Porsche steering wheel button. This article covers all steps of 3D printing process up until the final result.

Case Studies, Tutorials

How to design parts for SLA 3D Printing

In this article we will cover key design elements of SLA 3D printed parts. It is dedicated to experienced users who are already familiar with SLA 3D printing basics and are capable of designing their own parts.

Tutorials

Experiment: outdoor environment effect on resin 3D printed parts

In this post we are going to share with you our quick and simple experiment. We tried to show how resin 3D printed parts are affected by casual and very diverse outdoor environment - from harsh cold weather to sunny and warm.

Tutorials

Free NanoDLP Helper Spreadsheet

Quick and easy to use spreadsheet to setup cure times, lifting heights and speeds for 3D printing with nanoDLP software.

Downloads, Tutorials

Key things to know before calibrating resin 3D printer

In this AmeraLabs post we will dive into what is calibration of resin 3D printer and cover key things you need to know before running your calibration procedure.

Tutorials

x
This website stores cookies on your computer. These cookies are used to collect information about how you interact with our website and allow us to remember you. To find out more, see our Privacy Policy.. I AGREE