TRY-23
CE Class I Try-in resin for accurate and detailed dental try-ins
Best suited for
- Try-in dentures and diagnostic dentures
- Try-in implant-supported dentures
- Try-in verification for up to 24 hours
From €85.00
Medical device for dental professional use only. Read the Instructions for Use carefully beforehand.
Check available countries first for this product
- Austria
- Belgium
- Estonia
- Germany
- Iceland
- Ireland
- Lithuania
- Malta
- Netherlands
- Poland
- Spain
Your country not in the list? For more information please contact us.
TRY-23 Declarations of Conformity
Biocompatible* and Realistic 3D Printed Try-In
Biocompatible*, CE Marked Class I
TRY-23 is Class I CE marked and compliant with EN ISO 10993-1 as non-cytotoxic, non-sensitizing, and non-irritating. Free of MMA, BPA, phthalates, TPO, and THFA. Fully printed, cleaned, and post-cured parts are intended for intraoral try-in use.
*Following validated procedures provided in IFU
A Preview Patients Believe
Real teeth-like translucency and a smooth surface finish, in shades A1, A2, B1, and B2. The patient sees something close to the final restoration before you commit to production.
Fast and accurate printing
TRY-23 dental resin is very fast to print and produces high accuracy try-in models. It allows you to do more reliable cases in less time.
Prints on the Printer You Already Have
Built for 385 nm and 405 nm light sources: Asiga, Formlabs, Phrozen, Elegoo, Prusa, and similar machines. Starting settings are on our 3D printing settings page.
Easy Chair-Side Adjustments
TRY-23 cuts and carves with standard dental tools, so you can refine the try-in chair-side before the final denture is made.
Made in Europe
AmeraLabs has manufactured 3D printing resins in Kaunas, Lithuania since 2017 and ships to nearly 70 countries. Orders leave our warehouse within 1 to 2 business days, and we can move faster if you email sales@ameralabs.com before ordering.
Frequently asked questions
What tooth shades does TRY-23 come in?
A1, A2, B1, and B2. That covers the shade range most commonly used for try-in 3D printed denture setups, so you can match the case without compromising on the visual read.
What else can I use TRY-23 for?
TRY-23 is for printing denture try-in models. It covers tooth setup verification and occlusal and fit checks, and try-ins for implant-supported dentures.
Is TRY-23 compatible with my printer?
Most resin printers on 385 nm or 405 nm light sources, including Anycubic, Phrozen, Elegoo, Formlabs, Prusa, and Asiga. Check ameralabs.com/3d-printing-settings for initial settings for your printer.
If you are unsure whether your printer is compatible or cannot find the settings, contact us at support@ameralabs.com.