Anycubic Photon S Printer 3D printing settings for AmeraLabs resins
These are recommended 3D printing settings for Anycubic Photon S 3D printer (with 35W LED light source and color LCD). Use these as a starting point and adjust based on the results you get. We recommend printing AmeraLabs town calibration part and following its guide to find perfect settings for your printer.
AMD-3 LED Black on Anycubic Photon S
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 6.4 | 4 | 100 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 4.8 | 4 | 80 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.030 | 3.6 | 4 | 60 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
AMD-3 LED Grey on Anycubic Photon S
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 8 | 4 | 120 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 6 | 4 | 90 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.030 | 4.5 | 4 | 70 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
TGM-7 LED Grey on Anycubic Photon S
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 10.7 | 4 | 160 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 8.0 | 4 | 120 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.030 | 6.0 | 4 | 90 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
TGM-7 LED White, Red, Yellow and Blue on Anycubic Photon S
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 9.4 | 4 | 160 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 7 | 4 | 120 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.030 | 5.3 | 4 | 90 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
DMD-21 LED Sand on Anycubic Photon S
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 8 | 4 | 120 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 6 | 4 | 90 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.030 | 4.5 | 4 | 70 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
DMD-31 DLP Beige and Grey on Anycubic Photon S
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 13.6 | 4 | 160 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 10.2 | 4 | 120 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.030 | 7.7 | 4 | 90 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |