Elegoo Mars 3 Printer 3D printing settings for AmeraLabs resins

These are recommended 3D printing settings for Elegoo Mars 3 3D printer. Use these as a starting point and adjust based on the results you get. We recommend printing AmeraLabs town calibration part and following its guide to find perfect settings for your printer.

AMD-3 LED Black on Elegoo Mars 3

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Light-Off Delay (s)Bottom Light-Off Delay (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1001.441511.50107540180
0.0501.141511.50107540180
0.030141011.50107540180

AMD-3 LED Grey on Elegoo Mars 3

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Light-Off Delay (s)Bottom Light-Off Delay (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1002.042011.50107540180
0.0501.541511.50107540180
0.0301.141511.50107540180

TGM-7 LED Grey on Elegoo Mars 3

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Light-Off Delay (s)Bottom Light-Off Delay (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1002.142011.50107540180
0.0501.642011.50107540180
0.0301.241511.50107540180

TGM-7 LED White on Elegoo Mars 3

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Light-Off Delay (s)Bottom Light-Off Delay (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1001.742011.50107540180
0.0501.341511.50107540180
0.030141011.50107540180

DMD-21 LED Sand on Elegoo Mars 3

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Light-Off Delay (s)Bottom Light-Off Delay (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1002.042011.50107540180
0.0501.541511.50107540180
0.0301.141511.50107540180

DMD-31 DLP Beige and Grey on Elegoo Mars 3

Layer Thickness (mm)Exposure Time (s)Bottom Layers (count)Bottom Exposure Time (s)Light-Off Delay (s)Bottom Light-Off Delay (s)Bottom Lift Distance (mm)Lifting Distance (mm)Bottom Lift Speed (mm/min)Lifting Speed (mm/min)Retraction Speed (mm/min)
0.1003.443511.50107540180
0.0502.642511.50107540180
0.0301.942011.50107540180