Epax X1 Printer 3D printing settings for AmeraLabs resins
These are recommended 3D printing settings for Epax X1 3D printer (original version with 40W LED light source and color LCD). Use these as a starting point and adjust based on the results you get. We recommend printing AmeraLabs town calibration part and following its guide to find perfect settings for your printer.
AMD-3 LED Black on Epax X1
Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Light-Off Delay (s) | Bottom Light-Off Delay (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
0.100 | 4.7 | 4 | 70 | 11.5 | 0 | 10 | 7 | 5 | 40 | 180 |
0.050 | 3.5 | 4 | 60 | 11.5 | 0 | 10 | 7 | 5 | 40 | 180 |
0.030 | 2.6 | 4 | 40 | 11.5 | 0 | 10 | 7 | 5 | 40 | 180 |
AMD-3 LED Grey on Epax X1
Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Light-Off Delay (s) | Bottom Light-Off Delay (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
0.100 | 5.8 | 4 | 90 | 11.5 | 0 | 10 | 7 | 5 | 40 | 180 |
0.050 | 4.4 | 4 | 70 | 11.5 | 0 | 10 | 7 | 5 | 40 | 180 |
0.030 | 3.3 | 4 | 50 | 11.5 | 0 | 10 | 7 | 5 | 40 | 180 |
TGM-7 LED Grey on Epax X1
Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Light-Off Delay (s) | Bottom Light-Off Delay (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
0.100 | 7.8 | 4 | 120 | 11.5 | 0 | 10 | 7 | 5 | 40 | 180 |
0.050 | 5.8 | 4 | 90 | 11.5 | 0 | 10 | 7 | 5 | 40 | 180 |
0.030 | 4.4 | 4 | 70 | 11.5 | 0 | 10 | 7 | 5 | 40 | 180 |
TGM-7 LED White, Red, Yellow and Blue on Epax X1
Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Light-Off Delay (s) | Bottom Light-Off Delay (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
0.100 | 6.8 | 4 | 120 | 11.5 | 0 | 10 | 7 | 5 | 40 | 180 |
0.050 | 5.1 | 4 | 90 | 11.5 | 0 | 10 | 7 | 5 | 40 | 180 |
0.030 | 3.8 | 4 | 70 | 11.5 | 0 | 10 | 7 | 5 | 40 | 180 |
DMD-21 LED Sand on Epax X1
Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Light-Off Delay (s) | Bottom Light-Off Delay (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
0.100 | 5.8 | 4 | 90 | 11.5 | 0 | 10 | 7 | 5 | 40 | 180 |
0.050 | 4.4 | 4 | 70 | 11.5 | 0 | 10 | 7 | 5 | 40 | 180 |
0.030 | 3.3 | 4 | 50 | 11.5 | 0 | 10 | 7 | 5 | 40 | 180 |
DMD-31 DLP Beige and Grey on Epax X1
Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Light-Off Delay (s) | Bottom Light-Off Delay (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
0.100 | 10 | 4 | 100 | 11.5 | 0 | 10 | 7 | 5 | 40 | 180 |
0.050 | 7.5 | 4 | 80 | 11.5 | 0 | 10 | 7 | 5 | 40 | 180 |
0.030 | 5.6 | 4 | 60 | 11.5 | 0 | 10 | 7 | 5 | 40 | 180 |