Anycubic Photon Printer 3D printing settings for AmeraLabs resins
These are recommended 3D printing settings for Anycubic Photon 3D printer (original version with 25W LED light source and color LCD). Use these as a starting point and adjust based on the results you get. We recommend printing AmeraLabs town calibration part and following its guide to find perfect settings for your printer.
AMD-3 LED Black on Anycubic Photon
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 8.0 | 4 | 120 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 6.5 | 4 | 90 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.030 | 4.5 | 4 | 70 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
AMD-3 LED Grey on Anycubic Photon
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 10 | 4 | 150 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 7.5 | 4 | 120 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.030 | 5.6 | 4 | 90 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
TGM-7 LED Grey on Anycubic Photon
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 12.5 | 4 | 190 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 9.4 | 4 | 150 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.030 | 7.0 | 4 | 110 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
TGM-7 LED White, Red, Yellow and Blue on Anycubic Photon
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 11.5 | 4 | 190 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 8.5 | 4 | 150 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.030 | 6.3 | 4 | 110 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
DMD-21 LED Sand on Anycubic Photon
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 10 | 4 | 150 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 7.5 | 4 | 120 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.030 | 5.6 | 4 | 90 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
DMD-31 DLP Beige and Grey on Anycubic Photon
| Layer Thickness (mm) | Exposure Time (s) | Bottom Layers (count) | Bottom Exposure Time (s) | Rest Time After Retract (s) | Bottom Rest Time After Retract (s) | Bottom Lift Distance (mm) | Lifting Distance (mm) | Bottom Lift Speed (mm/min) | Lifting Speed (mm/min) | Retraction Speed (mm/min) |
| 0.100 | 17 | 4 | 180 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.050 | 12.8 | 4 | 150 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |
| 0.030 | 9.6 | 4 | 120 | 1 | 0 | 10 | 7 | 5 | 40 | 180 |